CNC Stone Fab Tools
CNC Tools
Our CNC tooling system features a thick layer of diamonds on each profile wheel, including the polishing steps, ensuring faster performance and longer tool life.
- Standard 35mm bore size.
- All tools are carefully balanced and each piece is accompanied by data sheets with set-up parameters, detailed operating information, and maintenance instructions.
- Tools can be redressed.
- CNC Profiles include: Two Types Of Radius Profiles; Ogee Straight; Double Eased; Bevel; Full Bullnose; Demi Bullnose; Straight.
Segmented Position “0” for CNC Tooling
- Customized for each individual profile, our segmented position “0” steps are ideal for removing just the right amount of material from the stone before beginning with traditional step 1
- While this position is optional, we guarantee that it will increase the life of the entire set of tools by reducing wear, and make cutting with step 1 even faster and more efficient than before
CNC Breaker Bits
Our breaker bits are segmented diamond tools designed for stock removal and pre-cutting. An optional step and should be followed by position “0”.
- The Single breaker is recommended for the following profiles: A3-R15, A4, B2, B3, BR3, E2, E3-C24, F2, F3, FG3, FV3, FV4, FZ3, H3, O3, O/S3; optional for the following profiles: A3-R10, E3-C9, E4
- The Double breaker is recommended for the following profiles: V2, V3, V4; optional for the following profiles: C3, FGS4
- Zero Tolerance Z breaker is an optional step that compensates for the finger bit or bridge saw by removing additional material on the stone that is left behind, and eliminates the need to frequently replace and re-calibrate the finger bit. May be used before position “0” for every HEXO® CNC profile.
|
Item Number |
Slab Thickness (mm) | Rotation Speed (rpm) | Over Material (mm/in) | Feed (mm/in) |
| SB/2/3/4-CNC | 20-30-40 | 5000-6000 | 1.0/0.04 | 1000-1500 (40-60) |
| DB2/3/4-CNC | 20-30-40 | 5000-6000 | 1.0/0.04 | 760-1500 (30-60) |
| ZTB2/3/4-CNC | 20-30-40 | 5000-6000 | 1.0/0.04 | 1000-1500 (40-60) |
CNC Tool Holders
Superabrasive offers CNC tool holders for different CNC machines, including Brembana, Bavelloni, and Intermac. Call us for additional information.
Additional Tools for CNC Applications
We offer finger bits for soft and hard materials. These ½ Gas, zero vibrations finger bits work on any CNC machine. They come with a center water feed and are used for wet applications only.
The orange bit in the photo is designed for soft material.Use the yellow bits for hard material.
Tech Stuff:
- Slab Thickness (mm): 20-30-40
- Rotation Speed (RPM): 5000
- Over Material (mm/in): 1.5/0.06
- Feed (mm/in): 380-500 (15-20)
We also offer a finger bit with twin segment, 23mm x 40mm, for soft material.
