The 32″ Lavina grinding and polishing machine is a true beast – it is powerful, productive and heavy-duty. Propane power means no wires and cables to mess with on the job site, and hence, significant time and cost savings. When propane equipment is used indoors, proper air ventilation with access to FRESH AIR and proper equipment maintenance (oil and filter changes, etc) are of critical importance for operator’s safety. Operators should always carry CO monitor or badge. Read all warnings and information in your machine manual before operating any equipment. Always use VAPOR tanks only with LAVINA machines. Do not fill over 80%, as this can cause freezing and pressure regulator damage.
GRINDER FEATURES
- Improved water system with gravity-fed water supply from the water tank and hose connection (fitting is included) for optimal wet grinding and simpler maintenance. There is no water pump or misting system on the new machines.
- Completely redesigned frame delivers superior maneuverability and easy tool changes.
- Dust-proof planetary drive protects internal components from dust and moisture, which reduces maintenance and increases service life.
- The heads of all propane grinders have counter-clockwise / left rotation. Use the blue PCDs and Carbide Scrapers.
- Easy-to-use integrated weights.
- Improved dust collection efficiency. Adjustable skirt with a flexible brush for better dust containment. Also, the vacuum hose connection is now closer to the dust source, and utilizes a metal camlock attachment.
- EPA & CARB Blue Sky Engines.
- Adjustable handle bar with multiple handle positions for more convenient operation and transportation. Make sure the handle position is locked when moving or using the machine.
- LED lights for monitoring the floor on the base in the front, and in the back of the machine near the floor.
- Convenient integrated lift points for moving the machine with a forklift.
- Charging phone station.
- Durable stainless steel cup holder.
GRINDING TIPS
- Overlap around 25% of the machine work path between passes.
- Check dust skirt to make sure it is all the way down, touching the floor to reduce airborne dust. Replace skirt if worn out or damaged.
- When starting machine hold it firmly and start moving (don’t keep it in one spot while heads are spinning).
- When stopping machine, keep moving until the grinding heads stop.
- To tilt machine up for tooling changes, move the weights back.
- To add more grinding pressure and grind more aggressively, put the weights down / forward.
- Always lock the weights during transportation.
